Henry Hoover Hose Repair - How to Replace The Hose End Cuff

Henry Hose Repair - Hose end cuff

Henry hoses can get damaged, especially at the end where it connects to the metal pipes. This is how to repair your Henry hose, replacing the damaged end for a brand new one. Better for your wallet and the environment. 

This is how to fit the Henry Hose Cuff ... 

PLEASE NOTE: If you have purchased a genuine Henry cuff and the retaining ring on your old cuff is fine, then the cuff can just be unclipped (see short video here) 

  • Cut your Henry Hoover hose just below the cuff, or if your hose is split, cut just short of the damage.
    how to repair henry hoover hose cuff
  • Fit the retaining ring to the Henry hose first. This is the smallest part of the cuff kit
    how to repair henry hoover hose cuff
  • Twist the inner threaded part of the kit onto the end of your hose. Twist ANTI-CLOCKWISE until it’s a snug fit.
    how to repair henry hoover hose cuff
  • Push the new cuff onto the end of your hose and clip the retaining ring into place.how to repair henry hoover hose cuff

That’s it... your done. A very simple repair.

 

Back to blog