How to Replace Henry UDS1053SN Motor with QUAMTR121

This is a quick guide of how to fit the MTR121 Motor by Qualtex to your Henry. I promise to get a video done for this ASAP. 

The Italian motor replaces the UDS1053SN on models with a red push on off switch and some models before this with a red rocker switch on the side. 

How to Change Motor 

1. Remove the screws from under Henry's hat, and I always recommend keeping his 'hat' upside down when changing any motor. 
2. Remove your old motor.
3. If you have a push down on off switch, use the white motor top mount from your old motor, on the new motor. If you have a rocker switch model, use the plastic ring with rectangular rubber supplied to secure your new motor. 
4. Connect white wires to your new motor (1st picture below) Doesn't matter which way round they go, just one on each corner. 
5. Fit motor into housing (2nd picture below)
6. New rubber base ring to be used on new motor as shown it fits either into the base first or onto the motor first, your choice. (3rd picture below)
7. Refit the back plastic base and do up the screws, making sure that no wires are trapped and there are no gaps in the casing. 
8. Done :) 

Video coming soon 

Jonny